Cuts summer heat gain through the roof
Metal roofs absorb and radiate heat directly into the roof space. Sisalation reflects up to 97% of radiant heat, keeping ceilings and living areas noticeably cooler during heatwaves.
Rockbank
Reflective foil sarking installed under metal sheeting in Rockbank to block radiant heat and reduce summer temperatures inside your home.
Share your details and Expert Insulation Melbourne will contact you about Sisalation Insulation in Rockbank.
Sisalation is a reflective foil laminate installed under roofing or behind wall cladding with an air gap. It reflects radiant heat away from your home, keeping interiors cooler in Rockbank’s hot summers. Often paired with bulk insulation like glasswool or polyester batts, it improves thermal resistance and helps manage moisture and dust in the roof space.
Rockbank’s exposed location and metal-roofed homes benefit from sisalation’s ability to reflect intense summer heat. Combined with bulk insulation, it creates a more stable indoor temperature and reduces reliance on cooling systems.
Metal roofs absorb and radiate heat directly into the roof space. Sisalation reflects up to 97% of radiant heat, keeping ceilings and living areas noticeably cooler during heatwaves.
Sisalation alone does not provide bulk thermal resistance. Installing it with ceiling batts (commonly R4.0 to R6.0) traps still air and boosts overall insulation effectiveness.
The foil layer helps manage moisture by reducing temperature differentials that cause condensation in the roof space, protecting timbers and ceiling materials.
Sisalation acts as a barrier against dust and loose particles entering the roof space, keeping the area cleaner and improving air quality.
Reflective foil does not compress or degrade over time like some bulk materials. Once installed with the correct air gap, it requires no upkeep.
Sisalation can be installed during new roof construction or added under existing metal sheeting if there is safe access and space for an air gap.
Installing sisalation requires careful placement to ensure the reflective surface faces the correct direction and maintains an air gap. Our team follows a precise process to maximise its effectiveness in Rockbank homes.
We check the roof structure, rafter spacing and existing insulation. Any old, damaged or compressed batts are removed first. If asbestos is suspected, work stops until a qualified assessor inspects it.
Sisalation is cut to size with allowance for overlaps and sealing at joins. The foil must run continuously from the ridge to the eaves to prevent heat bridging.
The foil is stapled or fixed to the rafters with the reflective side facing down towards the living space. A 25mm air gap is maintained between the foil and the roof sheeting for optimal performance.
All seams are taped with foil tape to create a continuous barrier. Bulk insulation batts are then laid over the sisalation between ceiling joists to complete the system.
Rockbank’s newer estates and homes with metal roofs are ideal for sisalation. The suburb’s open location and exposure to hot northerly winds make reflective insulation a smart choice to reduce cooling costs. Nearby suburbs like Melton and Diggers Rest share similar housing styles and climate, so the same approach applies.
Reflective foil sarking under metal roofs to cut summer heat gain in Rockbank homes.
Common questions about installing sisalation in Rockbank homes, from cost factors to compatibility with existing insulation.
Expert Insulation Melbourne installs sisalation in Rockbank to reflect radiant heat away from metal roofs and reduce indoor temperatures. This reflective foil laminate is installed under roofing with an air gap, often paired with bulk insulation like glasswool or polyester batts to improve thermal resistance. Homes in Rockbank benefit from reduced summer heat gain, lower cooling costs and better moisture control in the roof space.
Sisalation is particularly effective for Rockbank’s newer homes with metal sheeting, where radiant heat transfer through the roof is a major cause of discomfort. The foil reflects up to 97% of radiant heat, while bulk insulation in the ceiling (typically R4.0 to R6.0) traps still air to slow conductive and convective heat flow. Together, they create a more energy-efficient home that stays cooler in summer and warmer in winter.
The installation process involves inspecting the roof space, removing any old or damaged insulation, and fixing the sisalation with the reflective side facing down. An air gap of at least 25mm is maintained between the foil and the roof sheeting. Joins are sealed with foil tape, and bulk insulation is added over the top. Costs vary based on roof pitch, access, floor area and whether existing insulation needs removal.
Reduce summer heat gain and improve comfort in your Rockbank home with sisalation. We install reflective foil under metal roofs, paired with bulk insulation for better thermal performance.